Exhaust is on!

What a week! Baby Paul was born on Monday Sept 13, 1:30 pm, 8lbs 1oz. 21 1/4" long. I had a great week off but we still don't have a routine. he's a good eater, sleeper, and pooper, but night times is awake every 90 mins.

I had the week off and was relieved of my dad duties for an afternoon. Decided to have the exhaust installed on the Buick.

Its a 2.5" cross over stainless steel system by Magnaflow.
The shop did an excellent job, very particular of their work, and I'm very happy.

The whole system is welded too. The N25 tips took some time to get right, but the installers knew what they were doing. Its very strong and sounds amazing.

You be the judge...

(I just noticed I need to replace a brake light)






Black marks? What black marks?

Well not much has been happening.
I have sourced motor mounts and frame pads, and I have a 455 fan shroud. I think that's about it for required parts. Its just a matter of switching cams and heads and doing another test run before the final clean up and paint.

I also bought 6 cans of Buick Red paint so I'm ready for the job.

Also, I have a new 2.5" stainless x-over Magnaflow exhaust to go on too! Im not waiting for the new motor for this, I plan to have a shop put this on very soon.

I got some time last night to check out under the column on the Buick (previously converted from column shift to console by a previous owner)

My reverse lights never did work. Just like in a column shift car there is supposed to be linkage from the column to the trans. But its purpose is reversed.
When I move the console shifter, the linkage would in turn move the column collar, and thereby move the gear indicator on the dash and neutral starting switch too.

The linkage was never added from the trans to the column to activate the collar inside

so I always figured once I added that linkage (its on a shelf in the garage, won from an ebay auction about 3-4 yrs ago) everything would work.
There was a recent thread on the Buick board that suggested to go turn the collar manually.

Well I tried it.. no reverse lights

so I positioned myself on my back under the dash to find out why. the switch was there, it was hooked up too. no lights

I had a new switch purchased a few years ago in preparation for this time.
Took out the old, tried to put in the new and it would not fit.
The electronic part was the same, but the mounting holes were different.

so I ended up switching the mounting part which is the whole back of the switch.
Took the old one apart first, BOING little pieces everywhere. Took more care on the new one, and was able to put the mount from the old on the new electronic mechanism.

installed and when I manually move the collar on the steering column, I have LIGHTS when in the reverse position!
Now I have incentive to hook up the linkage
And...as a bonus, you cant start it when in the R or D position LOL like I can now!
and cant remove the key unless in P

Finally was able to put together an upper rad hose (a very odd shape) by combining 3 pieces with some exhaust tube for joiners

I went to the junk yard today, got some scrap Rad hose pieces and a small piece of exhaust pipe off a Civic to join them up.



Cold start, had 60 psi oil pressure - happy with that

After a few minutes, I had 190° and still 50 psi


After 10 minutes it reached 200°, switched on the fan, and it dropped to 180° and then climbed to 190°-195° and stayed steady for 5 more minutes.

At 15 minutes, it was at 195°, oil pressure was 30 psi, at 1000 RPM
if I increased RPM's Id get 50 psi of oil pressure. Then back to 30 at idle.

I think these numbers sound good!

The mufflers are on
Much more quiet, but I had a nasty exhaust manifold leak.
Took it off for a new gasket, broke two bolts. Hours and Hours later after breaking a bolt extractor in one of the holes too, the manifold was back on and its great.
The effort continues!

It Lives!!!!

11:00 pm
March 10 2001

Oil - check
Ignition - check
Fuel - check
mufflers... ugh nope

stand back... Vroom!

The evening started when Doc came over.
We removed the intake, re-sealed it and re-installed it.
Installed the carb and fuel line.
Plugged all the vacuum ports.
Put in the Distributor, wired it and made an educated guess at the timing that worked out well.
Created an upper radiator hose using 1 1/4" PVC pipe for the U-turn that was required

We didn't have water in it for this test, we were to anxious to see if it would attempt to start and did not think really that it actually would start.

So this week, I will create some exhaust and fill with water so we can run for longer. Plus it will be alot quieter so we can hear the motor.

Went to the junk yard on Saturday.
I got the dual exhaust off a Thunderbird V8 so I have matching mufflers. They are a nice smaller size too.
Picked up some heater hose, wire looming, radiator hose and fuel line - $22 not bad!

Notice how neat the wire looming makes it.
The head pipes I had kicking around the garage.